Jura ENA Micro 1 - Filter Cartridge Activation; Use Without Filter Cartridge

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 11/26
35. Unscrew 2x TORX 15 (front side).
Remove top case cover upwards.
36. Release 4x snap-locks
37. Remove thermoblock cover
38. Unscrew 3x TORX 15
(See also cable wiring chapter 6 )
39. Remove the upper and sideward
cable-connectors
40. Unscrew TORX 15 of the multi-valve
(bottom of the appliance)