Jura IMPRESSA A9 One Touch - Page 7

7
IMPRESSA A9 One Touch – Quick Reference Guide
CAUTION
If the descaling operation is interrupted, there may
be damage to the machine.
T Allow the descaling programme to run to
the end.
CAUTION
If the descaling agent comes into contact with
sensitive surfaces (e.g. marble), damage cannot be
ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approxi-
mately 45minutes.
E JURA descaling tablets are available from
specialised dealers.
E If you use a CLARIS Blue filter cartridge and
this is activated, you will not be prompted to
descale.
Precondition:The start screen is displayed. The
box with the Maintenance symbol c lights up red.
T Touch ‘c’.
T Touch ‘Descale’.
‘Descale’
E If you do not want to start descaling just yet,
press the ‘’ button.
T Touch ‘Start’.
T Touch ‘Start’ again.
‘Empty drip tray’
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
‘Agent in tank’
T Place a receptacle under the hot-water
spout.
9
T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets
in a receptacle holding 500ml of water. This
may take several minutes.
T Pour the solution into the empty water tank
and insert it into the machine.
‘Press the menu button’
T Touch the Menu symbol t.
‘Machine is being descaled’, water flows out
of the hot-water nozzle repeatedly.
The operation is interrupted, ‘Empty drip
tray’.
T Empty the receptacle.
T Empty the drip tray and coffee grounds
container and put them back into the
machine.
‘Fill water tank’
T Place a receptacle under the dual spout and
the hot-water spout.
T Remove the water tank and rinse it
thoroughly.
T Fill the water tank with fresh, cold water and
reinsert the tank.
‘Press the menu button’
9