Jura IMPRESSA J Series - Remove Water Tank and Tray; Turn Jura Emblem Anti-Clockwise; Unscrew 2 x TORX15; Remove Shield with Snap-locks

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
IMPRESSA J/XJ line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontageanleitung_J_Linie_EN.doc
L:\Geräte\Linie_J\J9\J9_4_OneTouch_TFT\Schulungs_Unterlag
en\E\Demontageanleitung_J_Linie_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
28.09.2006
27.08.2013
Page 4/18
3. Remove water tank and tray
4. Turn the JURA-emblem on the back
anti-clockwise and remove it
5. Unscrew 2x TORX15
6. Remove shield
(Snap-locks are situated up and down)