Jura Impressa Xs9 Classic User Manual

39
5 Maintenance
You can initiate the ‘Rinsing the cappuccino frother’ operation
manually.
Precondition:
COFFEE READY is displayed.
T Place a receptacle under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selection lever to the steam position n.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
MAINTENANCE
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
g T Turn the Rotary Switch until RINSE CAPPUCCINO is
displayed.
k T Press the Rotary Switch to start the rinse operation.
CAPPU. RINSING, the frother is rinsed.
The procedure stops automatically.
COFFEE READY
appears on the display.
T Carefully remove the frother from the Connector System
©
by twisting slightly.
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Reassemble the frother.
E Ensure that the individual parts are correctly and firmly
attached to one another to ensure optimum function of the
frother.
T Firmly attach the frother to the Connector System
©
.
Starting rinsing manually
Disassembling and
rinsing the
Professional
Cappuccino Frother

Jura Impressa Xs9 Classic Specifications

General

Product type	Espresso machine
Certification	TUV
Built-in grinder	Yes
Capacity in cups	- cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	5.7 L
Coffee beans capacity	260 g
Maximum operating pressure	15 bar
Number of grinder settings	6
Ground coffee container capacity	40 cups
Type	Coffee/Espresso
Dimensions (WxDxH)	410 x 390 x 470 mm
Cord length	1.1 m
Control type	Buttons
Product color	Black
Housing material	-
AC input voltage	220–240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	390 mm
Width	410 mm
Height	470 mm
Weight	13600 g