EasyManuals Logo

Jura J6 Quick Reference Guide

Jura J6
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
J6/J600 – Quick Reference Guide
J6/J600 – Quick Reference Guide
J
These short instructions do not replace the ‘J6/J600 Instructions for
Use’. Make sure you read and observe the safety information and
warnings first in order to avoid hazards.
You can initiate the rinse operation manually at any time.
T Place a receptacle under the coffee spout.
T Press the P button.
‘Maintenance status
T Press the Rotary Switch.
‘Clean’
T Turn the Rotary Switch until ‘Rinse’ is displayed.
T Press the Rotary Switch to initiate the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water
flows out of the coffee spout.
The rinse stops automatically. ‘Please select product’
appears on the display.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the cappuccino
frother after preparing milk.
When ‘Rinse the milk system’ is displayed, you can start rinsing by
pressing the Rotary Switch.
Rinsing the machine
Automatic milk system
rinsing

Other manuals for Jura J6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura J6 and is the answer not in the manual?

Jura J6 Specifications

General IconGeneral
Product typeEspresso machine
CertificationTUV
Capacity in cups16 cups
Hot water systemYes
Number of spouts2
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Appliance placementCountertop
Water tank capacity2.1 L
Coffee beans capacity250 g
Reservoir for brewed coffeeCup
Number of temperature settings3
Color namePiano White
Control typeButtons, Rotary
Display typeTFT
Product colorWhite
Drip/spout adjustmentHorizontal + Vertical
Americano makingNo
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0 W
Cable length1.1 m
Pump pressure15 bar
Country of productionSwitzerland
Weight and Dimensions IconWeight and Dimensions
Depth433 mm
Width285 mm
Height342 mm
Weight10900 g

Related product manuals