3
J6/J600 – Quick Reference Guide
To ensure that the cappuccino frother always works properly, you
must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
T Press the P button.
‘Maintenance status’
T Press the Rotary Switch.
‘Clean’
T Turn the Rotary Switch until ‘Clean the milk system’ is dis-
played.
T Press the Rotary Switch.
‘Clean the milk system’
T Press the Rotary Switch again.
T Press the ‘Start’ button.
T Remove the milk pipe from the milk container or carton.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
position z.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Press the ‘Next’ button.
‘Milk system is being cleaned’ appears and the cappuccino
frother and the milk pipe are cleaned.
Cleaning the milk system
CAUTION
6
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
