2
Z8 – Quick Reference Guide
Z8 – Quick Reference Guide
J
These short instructions do not replace the ‘Z8 Instructions for Use’.
Make sure you read and observe the safety information and war-
nings first in order to avoid hazards.
You can initiate the rinse operation manually at any time.
Precondition: The start screen is displayed.
T Place a receptacle under the dual spout.
T Touch ‘ P ’.
‘Machine settings’
T Move your finger across the display until ‘Maintenance sta-
tus’ is displayed in the centre.
T Touch ‘Maintenance status’.
‘Clean the milk system’
T Move your finger across the display until ‘Rinse’ is displayed
in the centre.
T Touch ‘Rinse’ to start the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water
flows out of the dual spout.
The rinse stops automatically. The start screen is displayed.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
To ensure that the milk system in the dual spout always works pro-
perly, you must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Rinsing the machine
Automatic milk system
rinsing
Cleaning the milk system
CAUTION
To Next Page
Loading...
