3
Z8 – Quick Reference Guide
Precondition: The start screen is displayed. ‘Clean the milk system’
is displayed.
T Touch ‘Clean the milk system’.
T Touch ‘Clean the milk system’ again.
T Touch ‘Start’.
T Touch ‘Start’ again.
‘Milk system cleaner’ / ‘Connect the milk tube’
T Remove the milk pipe from the milk container.
T Add 1 capful of milk system cleaner to the outer, rectangular
part of the container.
T Place the container under the dual spout and connect the
milk pipe with the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Slide the dual spout down to fix the container in place.
T Touch ‘Next’.
‘Milk system is being cleaned’, the dual spout and the pipe
are cleaned.
The operation stops automatically. ‘Milk system cleaning
complete’ appears briefly on the display.
The start screen is displayed.
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
T Remove the milk pipe and rinse it thoroughly under running
water.
Dismantling and rinsing
the dual spout
To Next Page
Loading...
