jurop JULIA 3000 HP - 2 Technical Data

REV
.
1
1
30-05-2017
INSTALLATION
,
USE AND MAINTENANCE MANUAL
JULIA 3000-5000-7000-8000-8500-9000 - HP
5 / 51
Jurop
SpA
Via Crosera n° 50
33082 Azzano Decimo, PN (Italy)
T
EL
.
+39
0
434
6368
11
F
AX
.
+39
0
434
636812
http://www.jurop.it
e-mail: info@jurop.it
Julia is a gear box suitable for driving a vacuum pump and a torque flow centrifugal pump by the same power take off.
Julia is provided with 2 power take off. The first power take off is applied to a slide vane vacuum pump (PN, PNR or LC Series) or a blower
vacuum pump oil emission free (DL Series). The second power take off is applied to a torque flow centrifugal pump for sewage waters or to a water
high pressure pump.
Julia 3000 - 5000 is provided of a control lever for the combined or alternative working mode of the 2 power take off (depending on the choosen
version).
Available on request:
• Packing seal complete with grease lubrication system.
• Centrifugal pump with mechanical seal.
• Shredder at the centrifugal pump inlet, suitable for liquid with long filaments.
2.
Technical data
J
J
U
U
L
L
I
I
A
A
3
3
0
0
0
0
0
0
-
-
5
5
0
0
0
0
0
0
• Torque flow cent
rifugal pump with open
impeller. High
head. Wide free space
between the impeller and t
he casing
allows the passage of
solids avoiding
clogging risks.
• Versions available Julia 3000 and Julia
5000
•
Shredder at the centrifugal pump inlet.
The two rotating knives are made of
wear-proof steel.
• Two fixed knives suitab
le for a better
mashing result.
•
Packing seal, on request with the
system of lubrication, for a longer seal
life.
• Mechanical seal upon request.
• The vanes vacuum pump is complete with vacuum/pressure changeover valve,
automatic lubrication and side tank. Available with air cooling (PN series) or water-
cooled (LC series).
• Blower vacuum pump oil emission free, with integrated 4-way switch and cooling air
injection (series DL).
• Splined shaft ASAE 1” 3/8.