This booklet contains the necessary instructions for a
correct installation, starting-up, running, and
maintenance of the vacuum pump as well as some
practical basic rules for a safe operating.
The knowledge of the following contents will grant a
long and trouble-free operation of the pump. The
observance of these operating and maintaining
instructions is absolutely necessary to have the
guarantee for defective parts acknowledged.
The manufacturer shall not be deemed responsible for
any damages resulting from an improper, incorrect or
unreasonable use of the pump.
It is therefore strictly recommended:
• the operators be acquainted with these
instructions;
• the booklet be kept in a place at hand known by all
users.
In these instructions, some graphic symbols are used to
draw the attention to some particular operations:
If these safety rules are not respected,
operators can be injured and the pump or
oilers damaged remarkably.
If these safety rules are not respected, the
pump or system can be damaged.
Suggestions for an environment-friendly
use of the pump.
Useful information for an easy usage and
maintenance of the pump.
PN155 D left splined shaft (A350709
410)
PN155 D smooth shaft, L rotation (A350909410) PN155 D smooth shaft, R rotation (A350809410)
PN155R D left splined shaft (A360709410)
PN155R D smooth shaft, L rotation (A360909410) PN155R D smooth shaft, R rotation (A360809410)
2. DIMENSIONS PN155
PN155 R
1. INTRODUCTION
To Next Page
Loading...
