Juta CM5024Z User Manual

JUTASolarChargeControllerModel:CM5024Z
--------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
NingboStarSolarCo.,LtdTel:(86)57426266608Fax:(86)5742626661856664636Email:Sales@pvsolarchina.comHttp://www.pvsolarchina.com
This is the Main interface. Use the button could in turn visit the followin
g
parameters interface.
3.1 Battery Voltage of View
As shown on the right, displays the value for
current battery voltage. This interface (based
interface) displays charge status, discharge status,
battery capacity and battery voltage.
3.2 The load on/off c
ontrol
View the interface in the battery voltage could be
used key On, off the load. In other interface,
The key there is no such feature.
3.3 Environment Temperature of View
As shown on the right, displays the ambient temperature of the controller,
the value used for temperature compensation on LVD function. The sensor
Must be plug in before using the controller.
3.4 Solar Panel charging current of Vie
w
As shown on the right, display the value of charging current from solar panel.
3.5 Load discharging current of View
As shown on the right, display the value of discharging
current for Loads.
3.6 View the Accumulated charging power (Ah) by solar panel
And back to zero
As shown on the right, display the accumulated charging power
from solar panel(Total ampere hour), long press the button more than
5seconds, The value will back to zero.
3.7 View the Accumulated discharging power (Ah) by Load and

Juta CM5024Z Specifications

General

Brand	Juta
Model	CM5024Z
Category	Controller
Language	English