Page 6 of 13
Device placement
Juzisound Total SOLO Sampler use active cooling system, with internal turbine fan. For cooling to
function properly, you must ensure at least 5 centimeters of free space in front and behind the unit.
Using the unit near power amplifiers (or other equipment containing large power transformers) may
induce hum. To alleviate the problem, change the orientation of this unit; or move it further away
from the source of interference.
This device may interfere with radio and television reception. Do not use this device in the vicinity
of such receivers.
Noise may be produced if wireless communication devices, such as cell phones, are operated in the
vicinity of this unit. Such noise could occur when receiving or initiating a call, or while convers-
ing. Should you experience such problems, you should relocate such wireless devices so they are
at a greater distance from this unit, or switch them off.
When moved from one location to another where the temperature and/or humidity is very different,
water droplets (condensation) may form inside the unit. Damage or malfunction may result if you
attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to
stand for several hours, until the condensation has completely evaporated.
Do not put anything that contains water over this unit.
Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit.
Swiftly wipe down any liquid that spills on the unit using a dry, soft cloth.