19
Digital broadcast sometimes offers sub
channels. By using the SUB CH button, you
can select a sub channel easily.
For example, to move to sub channel 123-45:
1) Press 1, 2 and 3 in order
2) Press the SUB CH button
3) Press 4 and 5 in order
4) Press the TUNE button
Allows you to listen to a program in Stereo,
Mono sound or another language (Sap) if
available. First you must set the MODE to TV
on your remote.
Notes:
• When you are receiving a digital broadcast,
if there are other languages, you can change
the language by pressing the ML/MTS
button.
• Keep the TV in stereo mode to get the best
sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono
sound only.
• Choose the mono setting to reduce
excessive noise on a certain channel or
broadcast.
• MTS is unavailable if your television’s Input
source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using
HDMI.
Lets you decide the input channel and select it.
After pressing the remote 0 - 9 buttons, press
TUNE.
Basics
LCT2520-001A-A.indd 19LCT2520-001A-A.indd 19 1/16/09 9:46:45 AM1/16/09 9:46:45 AM
To Next Page
Loading...
