39
MTS
Allows you to listen to a program in stereo, mono sound or another language (SAP).
(Depending if available in the program) First you must set the MODE to TV on your remote.
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• MTS unavailable if your television’s input source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using the HDMI.
Digital Audio (ML)
You can change the language if there are other languages available. (Digital channels only)
Sound Status
You can choose several types of sound modes. User / Speech / Jazz / Classic / Rock
Note:
• If you select User, you can customize the various sound frequencies.
100Hz / 330Hz / 1KHz / 3.3KHz / 10KHz
Audio Reset
Resets all sound adjustments at once to the default settings.
Sound
Advanced
Surround
You can select the surround mode you like. Off / Movie / Music / News / Mono
LCT2520-001A-A.indd 39LCT2520-001A-A.indd 39 1/16/09 9:46:58 AM1/16/09 9:46:58 AM
To Next Page
Loading...
Need help?
General
