Need help?Do you have a question about the JVC AL-F50B and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Motor | DC Servo Motor |
| Signal to Noise Ratio | 70 dB |
| Effective Length | 220 mm |
| Overhang | 15 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Output | 2.5mV |
| Power Supply | AC 120V, 60 Hz |
| Speeds | 33 1/3, 45 rpm |
| Tonearm Type | Static Balance |
| Cartridge | Moving Magnet |
| Type | Semi-Automatic |
| Tracking Force | 1.5 - 2.5g |
| Platter | Aluminum Die-cast |
| Output Level | 2.5mV |
To Next Page
