JVC AX-V4BK - Page 21

AX-V4BK
Removing the Front panel Ass’y
. Remove the top cover.
. Remove the Master volume knob,bass knob ,treble knob and balance knob.
. Remove the nut fastening the Master volume knob,bass knob ,treble knob and balance knob.
. Remove the 4screws © fastening bottom side of front panel ass‘y.
. Remove the 2screws © fastening top side of front panel ass‘y.
. Cut the tie band of the FW901 and FW961, Disconnect the CN961,CN801 and CN413.
. Remove it.
Removing the Front P.C. Board
. Removing the top cover. 5.
. Removing the front panel assembly.
. Removing the shield plate ass‘y.
. Removing the 13 screws ©.
. Remove it.
Assembling the 3 spacer ©(E306805-
122) fixing the shield plate ass‘y.
© SDSF3008M © SBSG3008CC © SDSF3008M @ SDSF2608Z