JVC BM-H2000PN Service Manual

BM-H2000PN
Setting value change
© Set for displaying the adjustment mode menu or the
adjustment mode sub-menu.
1. Press the right arrow [—] to change the adjustment value
in the + direction.
2. Press the left arrow [<-] to change the adjustment valve in
the - direction.
3. Press the up [ T }or down arrow { |] to change the
adjustment tem.
4, Press Menu to return the set-up main menu. (At the
adjustment mode sub-menu, again press Menu.)
Set-up menu exit
1, When settings are complete, press Menu.
<MENU>
2. The screen display extinguishes and the set-up menu is
exiled, ASPECTRATIO = :43
COLOR TEMP. 26500*
Set-up menu checks
™ White balance
To
check
if
adjustment
has
changed:
.
4.
Press
Menu
to
display
the
user
main
menu.
User
main
menu
2. If an asterisk ("} appears at the Color Temp. item, the
setting has been changed.
RGB/COMPONENT :RGB
<INITIALIZE MENU >
@ Set-up menu initialize
To return changed Size/Centering and White Balance
Adjust to original status (initialize);
1. Hold the mainframe down arrow { |i and Menu
depressed, and set power on (inoperable from remote
controller).
2. The initialize menu is displayed {hold depressed until
menu appears).
3. Select Set-up Menu Reset and press Enter.
4, The set-up reset menu is displayed.
5. Press Enter to return the standard settings. Note that
Remote Elect, Status Display and Control Lock are
initialized and ID No. is cleared to 0.
1D NUMBER SET
> <SET-UP MENU> RESET
Initialize menu
<SET-UP MENU > RESET
Are you sure 7
“Yes” then [ENTER] {
”No* then [~Jor{] ‘
Set-up reset menu
28 (No.51042)

JVC BM-H2000PN Specifications

General

Brand	JVC
Model	BM-H2000PN
Category	Monitor
Language	English