To Next PageTo Next Page
Need help?Do you have a question about the JVC BM-H1900SU - Color Production Monitor and is the answer not in the manual?
Covers handling, fire, shock, and environmental safety measures for the monitor.
Advises against displaying static images or extremely bright images for extended periods to prevent screen burn-in.
Highlights features like multi-system compatibility, high-definition picture tubes, auto white-balance, and remote control support.
Details the function of each button, switch, and indicator on the monitor's front panel for operation and adjustment.
Describes the various input/output terminals and their functions on the rear of the monitor for signal connectivity.
Explains how to connect for external synchronization and configure RGB/COMPO(SDI) terminals for signal input.
Covers turning the monitor on/off, selecting video inputs, and adjusting audio levels.
Instructions for removing color patches caused by magnetic fields using the DEGAUSS function.
Details how to adjust Contrast, Brightness, Chroma, and Phase for optimal picture quality.
Explains which picture adjustments are effective for different video signal types.
Describes Under Scan, Pulse Cross, Color Off, and Blue Check functions for picture analysis and signal checking.
Guides on accessing the menu, selecting items, and switching picture aspect ratios (4:3 and 16:9).
Explains how to use the comb and trap filters for composite NTSC video signals to improve picture clarity.
Covers peaking, AFC, color temperature, and NTSC setup level adjustments for fine-tuning.
Details how to set the chrominance level for component video signals from different recorders.
Instructions for activating memory mode to recall and lock picture settings, preventing unauthorized changes.
Guides on saving and modifying picture settings in memory for quick recall.
Step-by-step process for revising programmed picture settings via the menu interface.
How to navigate the setup menu and adjust RGB signal picture size and position (centering).
Adjusting white balance and configuring Tally/Remote terminal functions for external control.
Setting the status display on/off and deactivating front panel controls to prevent accidental changes.
Procedures for resetting menu, setup, and picture adjustment settings to their default values.
How to use the remote for on-screen menu navigation, picture adjustments, and sound controls.
Guides on programming ID numbers and assigning monitors for remote control of multiple units.
General
