17
q
SET-UP MENU
r
RESET
Are you sure ?
g
Yes
h
then
g
No
h
then or
q
IN I T I AL IZE MENU
r
ID NUMBER SET
q
SET-UP MENU
r
RESET
q
MENU
r
RESET
Are you sure ?
g
Yes
h
then
g
No
h
then or
PICTURE SETTING INITIALIZATION
The MENU and/or SET-UP MENU settings, including changes added later by the user,
can be reset (initialized) to their initial (default) settings.
To initialize MENU settings only
MENU settings (except MEMORY MODE and RGB/COMPO(SDI)) can
be exclusively reset:
1. With the ▼ button pressed, press the MENU button to display
11
11
1 on screen.
2. ● Press the ENTER button to reset.
● Press the or button to cancel.
To initialize both MENU/SET-UP MENU settings
MENU and SET-UP MENU settings other than MEMORY MODE and
RGB/COMPO(SDI) can be reset at the same time. In this case, PICTURE
ADJUST settings via remote control are also reset, and the monitor’s ID
number is also reset to 00.
1. Press the POWER switch to turn the power off.
2. With the ▼ and MENU buttons pressed, press the POWER switch to turn
the power on. Keep pressing the ▼ and MENU buttons until
22
22
2 appears on
screen.
3. Press the ▲ or ▼ button to select SET-UP MENU RESET. Then press the
ENTER button to display
33
33
3 on screen.
4. ● Press the ENTER button again to execute.
● Press the or button to cancel.
● MENU and PICTURE ADJUST settings (except MEMORY
MODE and RGB/COMPO(SDI)) can also be simultaneously
reset via the optional wireless remote control unit:
1. Press the MENU key to display MENU on screen.
2. Press the RESET key to execute.
● For initial (default) MENU settings,
see page 21.
ENTER
22
22
2
11
11
1
33
33
3
ENTER
ENTER
To Next Page
Loading...
Need help?
General
