To Next PageTo Next PageWhat to do if my JVC Monitor has no picture with the power on?
If your JVC Monitor has no picture when powered on, ensure the video signal is correctly output from the connected component. Also, verify that the input signal is properly selected and the video cable is firmly connected.
Why is my JVC Monitor picture shaking?
If the picture on your JVC Monitor is shaking, it might be too close to a device generating a strong magnetic field. Move the monitor away from such devices until the picture stabilizes.
Why is my JVC Colour Video TM-A140E picture unnatural, irregularly coloured, or distorted?
If your JVC Monitor displays an unnatural, irregularly colored, or distorted picture, it might be too close to a speaker, magnet, or another device generating a strong magnetic field. Move the device away from the monitor, turn the monitor’s power off, wait at least 30 minutes, and then turn the power on again.
Why does my JVC Colour Video TM-A140E Monitor have no colours, wrong colour, or dark picture?
If your JVC Monitor shows no colors, wrong colors, or a dark picture, verify that the color system is selected properly. Set the COLOR SYSTEM in the screen mode to [AUTO] mode. Also, check if the picture control settings (CONTRAST, BRIGHT, CHROMA, or PHASE) have been changed; if so, set each picture control to the standard setting.
General
