Other problems
The lamp does not flash
during battery pack
charging.
0
Check the remaining battery power.
(When the battery pack is fully
charged, the lamp does not flash.)
5
0
When charging in either a hot or cold
environment, ensure that battery is
being charged within the permitted
temperature range. (Otherwise,
charging may stop to protect the
battery pack.)
5
This unit heats up.
0
This is not a malfunction. (This unit
may become warm when used for a
long time.)
-
Warning Indications
Warning Indications Action Page
Warning Indications
RECORDING FAILURE
0
Turn off and on this unit again. -
0
If the above does not solve the
problem, back up your files and
execute “FORMAT BUILT-IN MEM.”
or “FORMAT SD CARD” in the
“COMMON” menu. (All data will be
deleted.)
-
DATA RECORDED FILE IS
TOO SMALL TO BE SAVED
0
When time-lapse recording is
stopped with the recorded time less
than “0:00:00:14”, the video will not
be saved.
-
ERROR IN BUILT-IN
MEMORY!/MEMORY
CARD ERROR!
0
Turn off and on this unit again. -
0
Remove the AC adapter and battery
pack, then remove and re-insert the
SD card.
-
0
Remove any dirt from the SD card
terminals.
-
0
If the above does not solve the
problem, back up your files and
execute “FORMAT BUILT-IN MEM.”
or “FORMAT SD CARD” in the
“COMMON” menu. (All data will be
deleted.)
-
15
To Next Page
Loading...
