To Next PageTo Next PageWhy does my JVC Everio GZ-MG335 battery die so fast?
If your JVC Camcorder's battery life is short even after a full charge, ensure you are using the camera within appropriate operating temperatures. The battery might also be worn out and require replacement.
What to do if my JVC Everio GZ-MG335 has no power?
If your JVC Camcorder has no power, make sure the AC adapter is securely connected. Try detaching and reattaching the battery pack firmly. If that doesn’t work, replace the battery with a fully charged one.
Why is the access/charge lamp on my JVC Everio GZ-MG335 Camcorder not lighting during charging?
The access/charge lamp on your JVC Camcorder might not light during charging because charging may stop in extremely high or low temperatures to protect the battery. It is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F). Also, when the battery is already fully charged, the lamp will not light. Check the remaining battery power.
What to do if my JVC Everio GZ-MG335 recording cannot be performed?
If your JVC Camcorder is not recording, it might be because the recording medium is full. Try deleting unnecessary files or replacing the microSD card. Also, ensure that you have selected the correct recording medium.
What to do if the focus is not adjusted automatically on my JVC Everio GZ-MG335?
If the focus on your JVC Camcorder isn't adjusting automatically, set the [FOCUS] to [AUTO]. Also, try cleaning the lens and check the focus again.
What to do if my JVC Everio GZ-MG335 digital zoom does not work?
If the digital zoom on your JVC Camcorder isn't working, change the settings in [ZOOM]. Also, note that digital zoom is not available in still image recording mode.
What to do if playback cannot be performed on my JVC Camcorder?
If playback cannot be performed on your JVC Camcorder, ensure you have selected the correct recording medium. To watch images on a TV, set the TV’s input mode or channel that is appropriate for video playback.
What to do if the microSD card cannot be removed from my JVC Camcorder?
If the microSD card is stuck in your JVC Camcorder, try pushing the microSD card in a few more times.
Why does the 7REC indicator flash during video recording on my JVC Everio GZ-MG335 Camcorder?
The 7REC indicator flashes on your JVC Camcorder during video recording because the camera's temperature is increasing. If the camera continues to heat up, recording may be stopped to protect the recording medium. In this case, turn off the power, and then wait until the camera cools down.
Why does the Findicator flash during video playback on my JVC Everio GZ-MG335 Camcorder?
The Findicator flashes during video playback on your JVC Camcorder because the camera's temperature is increasing. If the camera continues to heat up, playback may be stopped to protect the recording medium. In this case, turn off the power, and then wait until the camera cools down.
General| Recording Format | MPEG-2 |
|---|---|
| Optical Zoom | 32x |
| LCD Screen | 2.7 inches |
| Weight | 0.8 kg |
| Digital Zoom | 800x |
| Image Stabilizer | Electronic |
| USB Interface | USB 2.0 |
| Image Sensor | 1/6-inch CCD |
| Video Resolution | 720 x 480 |
| Effective Pixels | 800, 000 |
| Storage | 30GB Hard Disk Drive |
Guide to attaching the battery pack and opening the lens cover.
Steps for selecting video mode and starting recording.
Steps for selecting playback mode and viewing content.
Information on electrical shock, fire hazards, moisture exposure, and ventilation.
Precautions for handling lithium batteries and general product safety.
Essential safety instructions for operating the device.
Procedure for initiating and ending video recording.
Steps for taking still photos, including focus confirmation.
PC requirements, supported media, and system configurations for backup.
Step-by-step guide to installing the CyberLink software suite.
Procedure for connecting the camera to a PC using a USB cable.
Steps for backing up files to PC using the installed software.
Requirements for Mac OS and hardware for file backup.
Procedure for connecting the camera to a Macintosh computer via USB.
Steps for backing up camera files to a Macintosh computer.
Solutions for common camera issues like no power or recording failures.
Procedure for resetting the camera to its factory default settings.
Important safety warnings regarding operation, environment, and preventing drops.
