To Next PageTo Next PageWhat to do if JVC Camcorder remote control does not work?
If the remote control for your JVC Camcorder isn't working, first replace the battery. Then, make sure [REMOTE] is set to [ON]. Also, the remote control may not operate outdoors or in places exposed to strong light.
What to do if JVC Camcorder recording stops by itself?
If the JVC Camcorder stops recording automatically, it could be due to several reasons. The camcorder's temperature may have increased; in this case, REC flashes on the LCD monitor. To resolve this, turn off the camcorder, wait for a while, and then start recording again. Alternatively, move away from locations with excessive sound or vibration. If there is a HDD malfunction, record to a microSD card. You can also insert a microSD card and set both [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD].
How to troubleshoot no power on JVC Everio GZ-MG670?
If your JVC Camcorder isn't receiving power, make sure the AC adapter is correctly connected and the battery pack is recharged.
Why is JVC Camcorder battery display incorrect?
If the remaining battery display on your JVC Camcorder is incorrect, especially after using it in high or low temperatures, or after repeated charging, fully charge the battery pack, run it down completely, and then recharge it again.
What to do if HDMI-CEC functions do not work properly with JVC Camcorder?
TVs may operate differently depending on the specifications, even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC functions of the camcorder cannot be guaranteed to operate in combination with all the TVs. In such cases, set [HDMI CONTROL] to [OFF].
Why can't I perform recording on my JVC Everio GZ-MG670?
To enable recording on your JVC Camcorder, slide the mode switch to select the desired mode (! or #).
Why does the color look strange on my JVC Everio GZ-MG670 Camcorder?
If the color on your JVC Camcorder looks strange (too bluish, too reddish, etc.), set [WB] in [MANUAL SETTING] appropriately to the light source. Alternatively, select [MWB] in [WB] while holding a sheet of plain white paper in front of the camcorder so that the white paper fills the screen. Keep touching OK until the B indicator appears.
Why can't I activate the white balance setting on my JVC Camcorder?
You can't activate the white balance setting on your JVC Camcorder if [SEPIA] or [MONOTONE] are selected as effects. Also, do not use [TWILIGHT] from scene select.
What to do if the recorded subject is too dark with JVC Camcorder?
If your JVC Camcorder is recording subjects that appear too dark, try these solutions: * Use backlight compensation. * Set [GAIN UP] to [AGC] or [AUTO]. * Use [NIGHT] from scene select. * Set the brightness to the [+] side.
How to fix JVC Everio GZ-MG670 when no power is supplied?
If your JVC Camcorder isn't getting power, ensure the AC adapter is correctly connected and the battery pack is fully recharged.
General| Video Format | MPEG-2 |
|---|---|
| Optical Zoom | 35x |
| Digital Zoom | 800x |
| LCD Screen Size | 2.7 inches |
| Weight | 380 g |
| Image Stabilizer | Electronic |
| Image Sensor Size | 1/6 inch |
| LCD Screen Resolution | 123, 000 pixels |
| Still Image Format | JPEG |
| Battery Type | Lithium-ion |
| Recording Media | HDD |
| Image Sensor | CCD |
| Interface | USB 2.0, AV output |
Details on preventing electric shock, fire hazards, and exposure to rain or moisture.
Guidelines for safe handling, charging, and disposal of the lithium battery.
Information on ventilation, avoiding liquids, sunlight exposure, and handling the LCD.
Instructions for charging the battery pack and adjusting the camera's grip strap.
Procedure to set the camcorder's date, time, daylight saving, and geographic area.
Steps for selecting video mode, recording mode, and starting/stopping recording.
Steps for selecting playback mode, choosing files, and using playback controls.
Identification of key buttons and connectors on the camcorder and remote control.
Explanation of various indicators displayed on the LCD monitor during recording.
Procedure for changing the language displayed on the camcorder's LCD monitor.
Detailed steps for recording video, including stopping and changing quality settings.
Steps for capturing still images, including focus and quality settings.
Information on using the zoom lever and controlling the LED light.
Steps for selecting video playback mode and navigating recorded videos.
Instructions for switching to manual recording and adjusting settings.
Guide for connecting the camcorder to a TV using AV or HDMI connectors.
Procedure for deleting recorded video files and still images from the camcorder.
Instructions on copying files to DVD discs using a compatible DVD burner.
Guidance on resolving common issues, malfunctions, and error messages.
Details on power requirements, consumption, dimensions, and operating conditions.
Important cautions regarding the AC adapter and the rechargeable battery pack.
