V
vatkinsSep 12, 2025
Why are sound or video interrupted on my JVC Everio GZ-MG670 Camcorder?
- EElaine StoneSep 12, 2025
Sometimes playback is interrupted at the connecting section between two scenes on your JVC Camcorder. This is not a malfunction.
To Next PageTo Next PageWhy are sound or video interrupted on my JVC Everio GZ-MG670 Camcorder?
Sometimes playback is interrupted at the connecting section between two scenes on your JVC Camcorder. This is not a malfunction.
What to do if JVC Everio GZ-MG670 Camcorder displays a band of bright light?
If you see a band of bright light on the LCD monitor of your JVC camcorder, it usually happens when there's a strong light source nearby. It's not a malfunction. Try changing the direction of the camcorder to prevent the light source from coming into view.
Why is the continuous shooting speed slow on my JVC Camcorder?
The continuous shooting speed on your JVC Camcorder will drop after continuous shots. Also, continuous shooting speed may drop depending on the recording media or under certain recording conditions.
Why can't I activate the white balance setting on my JVC Camcorder?
You can't activate the white balance setting on your JVC Camcorder if [SEPIA] or [MONOTONE] are selected as effects. Also, do not use [TWILIGHT] from scene select.
Why does the color look strange on my JVC Everio GZ-MG670 Camcorder?
If the color on your JVC Camcorder looks strange (too bluish, too reddish, etc.), set [WB] in [MANUAL SETTING] appropriately to the light source. Alternatively, select [MWB] in [WB] while holding a sheet of plain white paper in front of the camcorder so that the white paper fills the screen. Keep touching OK until the B indicator appears.
What to do if JVC Everio GZ-MG670 focus is not adjusted automatically?
If your JVC Camcorder isn't focusing automatically, first wipe the lens with a lens cleaning cloth. If you're recording in a dark place or a subject lacking contrast, try adjusting the focus manually.
Why isn't the charging lamp flashing on my JVC Everio GZ-MG670 Camcorder?
If the lamp does not flash during battery pack charging on your JVC Camcorder: * Check the remaining battery pack charge. The lamp does not flash when the battery pack is fully charged. * If recharging in a hot or cold environment, ensure that the battery is being charged within the permitted temperature range. If the battery pack is being recharged outside the permitted temperature range, recharging may stop to protect the battery pack.
What to do if JVC Everio GZ-MG670 Camcorder recorded subject is too bright?
If your JVC Camcorder is recording subjects that appear too bright, try these solutions: * Set the backlight compensation to [OFF] if it is being used. * Set the brightness to the [–] side.
How to fix JVC Camcorder if the power was turned off accidentally?
If your JVC Camcorder turns off unexpectedly, and you're connected to a TV via HDMI, it might be due to HDMI-CEC. Try setting [HDMI CONTROL] to [OFF] in the camcorder's settings if you're not using HDMI-CEC.
What to do if JVC Everio GZ-MG670 LCD monitor is difficult to see?
The LCD monitor on your JVC Camcorder may be hard to see if you're using it in bright environments, such as direct sunlight.
General| Video Format | MPEG-2 |
|---|---|
| Optical Zoom | 35x |
| Digital Zoom | 800x |
| LCD Screen Size | 2.7 inches |
| Weight | 380 g |
| Image Stabilizer | Electronic |
| Image Sensor Size | 1/6 inch |
| LCD Screen Resolution | 123, 000 pixels |
| Still Image Format | JPEG |
| Battery Type | Lithium-ion |
| Recording Media | HDD |
| Image Sensor | CCD |
| Interface | USB 2.0, AV output |
Details on preventing electric shock, fire hazards, and exposure to rain or moisture.
Guidelines for safe handling, charging, and disposal of the lithium battery.
Information on ventilation, avoiding liquids, sunlight exposure, and handling the LCD.
Instructions for charging the battery pack and adjusting the camera's grip strap.
Procedure to set the camcorder's date, time, daylight saving, and geographic area.
Steps for selecting video mode, recording mode, and starting/stopping recording.
Steps for selecting playback mode, choosing files, and using playback controls.
Identification of key buttons and connectors on the camcorder and remote control.
Explanation of various indicators displayed on the LCD monitor during recording.
Procedure for changing the language displayed on the camcorder's LCD monitor.
Detailed steps for recording video, including stopping and changing quality settings.
Steps for capturing still images, including focus and quality settings.
Information on using the zoom lever and controlling the LED light.
Steps for selecting video playback mode and navigating recorded videos.
Instructions for switching to manual recording and adjusting settings.
Guide for connecting the camcorder to a TV using AV or HDMI connectors.
Procedure for deleting recorded video files and still images from the camcorder.
Instructions on copying files to DVD discs using a compatible DVD burner.
Guidance on resolving common issues, malfunctions, and error messages.
Details on power requirements, consumption, dimensions, and operating conditions.
Important cautions regarding the AC adapter and the rechargeable battery pack.
