EN 9
To protect the lens, attach the provided lens cap to the camera as shown in the illustration.
Attach the core filter to the DC cord. The
core filter reduces interference.
Attachment position (墌 right)
Attaching the Shoulder Strap
Attaching the Lens Cap
Attaching the Core Filter
Buckle
Strap Guide
Eyelet
Peel off the pad and thread the
end of the strap through the
eyelet.
Thread the strap through the
buckle, adjust its length, and use
the strap guide to fix it in place.
Position the buckle near the
eyelet and reattach the pad.
Place here during
recording.
AC Adapter
DC Cord
Core Filter
Release the stopper.
3 cm
Wind once.
GETTING STARTED
M6E3PAL.book Page 9 Monday, June 12, 2006 2:20 PM
To Next Page
Loading...
Need help?
General