JVC FS-GD7 - Random Playback and Program Management; Random Playback Mode Activation; Program Playback Control and Modification

23
4
Start playback.
To check the programmed contents
Before or after playback...
To modify the program
Before or after playback...
To exit from Program Play
Before or after playback...
Playing at Random—Random Play
You can play the chapters or tracks of all loaded discs at
random.
• Random Play cannot be used for some DVDs.
1
Before starting playback, activate Random Play.
2
Start playback.
• During Random Play, you cannot select disc by using
DISC SELECT.
To exit from Random Play
Before or after playback...
Playback starts in the order you
have programmed.
To skip a step:
To pause: To stop:
To release, press
DVD/CD 3 .
To erase the last step:
To erase the entire
program:
To add steps in the program:
Repeat step 2 on page 22.
In the programmed order.
In the reverse order.
PROGRAM RANDOM
Canceled
Playback starts in random order.
Random Play continues to the
disc on the next tray when all the
chapters or tracks in current disc
are played once (when Repeat
Play is not activated).
• Playback ends when all the
discs are played once (when
Repeat Play is not activated).
To skip a chapter/
track:
To pause: To stop:
To skip to the beginning
of the current track,
press 4
.
To release, press
DVD/CD 3 .
Remote
ONLY
PROGRAM RANDOM
Canceled
PROGRAM RANDOM
Canceled
FS-GD7[J]_EN.book Page 23 Tuesday, April 5, 2005 10:45 AM