JVC GR-45 User Manual

Rehearsal
If you wish to rehearse shooting angles, compose
scenes, etc., without actually recording on the
tape, press the MONITOR button, instead of
REC. The aimed-at scene will appear on the
viewfinder screen. For full-auto rehearsal, also
press the FULL AUTO button. To engage the
Recording Standby mode from rehearsal,
press the REC button. To disengage the Re¬
hearsal mode, press the STOP button.
• Rehearsal is possible whether a cassette is
loaded or not.
•With a cassette loaded, rehearsal is not possible
during rewind or fast forward.
•The power save circuit does not function
during rehearsal. (For power save function,
see page 12.)
Viewfinder Monitoring
• Rewind the tape to a point from which you
want to check the recording.
• Press the PLAY button, and you can view the
playback picture on the viewfinder screen.
Notes:
•Pressing the PAUSE/STILL button during
playback stops the picture on the view¬
finder screen.
•Shuttle search is also possible in both
directions.
Warnings
Tape-end warning
•The recording indicator blinks on the viewfinder scre ?
and the LCD display a few minutes before the end of $
tape.
•When the end of the tape is reached during recording, ^
Stop mode engages automatically.
Battery warning
Viewfinder LCD Display
•When the battery power is coming to an end, a batten
warning indication appears both in the viewfinder and tf
LCD display. Replace the battery pack with a ful
charged one.
•After these indications appear, the power turns off aut.
matically. In this state, however pressing the POWE
switch while holding EJECT switch pressed turns tf
power on and ejects the cassette.
Low-light warning
Blinking
• If the blinking "LIGHT" indicator appears on the viev
finder screen, the amount of light is insufficient. Increa
the lighting.
11

JVC GR-45 Specifications

General

Brand	JVC
Model	GR-45
Category	Camcorder
Language	English