JVC GR-AXM710 - Installing the Battery; Using the Remote Control Unit

60 EN
1
1
2
3
2
3
7
8
9
0
!
@
4
5
6
USING THE REMOTE CONTROL UNIT
Buttons
1 Infrared beam
transmitting window
2 ZOOM (T/W) Buttons
3 PLAY Button
4 STOP Button
5 REW Button
6 INSERT Button
7 START/STOP Button
8 INT. TIME Button
9 REC TIME Button
0 PAUSE Button
! FF Button
@ A.DUB Button
RM-V705U
(provided)
Installing The Battery
The remote control uses one lithium battery
(CR2025).
1
PULL OUT BATTERY HOLDER
Pull out the battery holder by inserting a pointed
instrument into the slot.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the caution concerning lithium batteries
(Z pg. 2).
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR.
Slot
Functions
With the camcorder’s Power Switch set
to “CAMERA”, “AUTO” or “PRO.”
Transmits the beam signal.
Zoom in/out (Z pg. 28)
—
—
Retake (rewind)/Quick Review
(
Z pg. 29)
—
Functions the same as the Recording Start/Stop Button on the camcorder.
Self-Timer/Time-Lapse (Z pg. 61)
Animation/Time-Lapse (Z pg. 61)
—
Retake (forward) (Z pg. 29)
—
With the camcorder’s Power Switch
set to “PLAY”.
—
Playback start (Z pg. 46)
Stop (
Z pg. 46)
Rewind, Reverse Shuttle Search
(Z pg. 46, 48)
Insert Editing (
Z pg. 62, 63)
—
—
Pause (
Z pg. 48)
Fast-Forward, Forward Shuttle Search
(Z pg. 46, 48)
Audio dubbing (
Z pg. 64)