EN 11
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
1 AC Adapter AP-V17E
2 Battery Pack BN-VF707U
3 Audio/Video Cable (ø3.5 mini-plug to RCA
plug)
4 Shoulder Strap ( pg. 11 for attachment)
5 Lens Cap ( pg. 11 for attachment)
NOTES:
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one
core filter, the end that is closest to the filter
should be connected to the camcorder.
● Make sure to use the provided cables for
connections. Do not use any other cables.
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
How To Attach The Shoulder Strap
Follow the illustration.
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap
guide and the buckle.
÷ To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Provided Accessories
Place here during
shooting.
3
2
2
1
Strap guide
Buckle
Eyelet
GR-D350AG_EN.book Page 11 Wednesday, December 28, 2005 8:24 AM
To Next Page
Loading...
Need help?
General
