EDITING
34 EN
MasterPage: Left
It is also possible to transfer still/moving images
to a PC with a DV connector by using the
software equipped with the PC or commercially
available software.
If you are using a Windows
®
XP, you can use
Windows
®
Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
Windows
®
Messenger.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector
(4 or 6 pins) on the PC.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
Connection To A Personal Computer
PC with DV connector
To DV IN/OUT
To DV connector
Core filter
Core filter
DV cable
(optional)
When connecting the camcorder to a PC using
a DV cable, make sure to follow the procedure
below. Connecting the cable incorrectly may
cause malfunctions to the camcorder and/or
the PC.
● Connect the DV cable first to the PC, and then
to the camcorder.
● Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
GR-D350AG_EN.book Page 34 Wednesday, December 28, 2005 8:24 AM
To Next Page
Loading...
Need help?
General
