34 EN
IC FILMCLASS
SEP I A
GHTT
W
ILI
ONEMONOT
SNO
W
SSPORT
GIHTSPOTL
ES T ROB
1
SLO
W
2
SLO
W
ERSHUTT
1/120
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Programme AE With Special Effects
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ PROGRAM
AE”, then press it.
4
Rotate the MENU wheel to select the desired mode,
then press it. Selection is complete.
5
Press the MENU wheel again. The Menu Screen
closes.
6
Press PROG.AE so that the selected effect indicator
appears.
To Deactivate The Selected Mode . . .
.... press PROG.AE again so that the effect indicator
disappears.
NOTE:
Programme AE with special effects can be changed during
recording or during Record-Standby.
MENU Wheel
Power Switch
IMPORTANT:
Some modes of Programme AE with special
effects cannot be used with certain Fade/Wipe
Effects (
pg. 33). If an unusable mode is
selected, its indicator blinks or goes out.
Lock Button
Shooting
Mode Switch
Display
Menu Screen
PROG.AE Button
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
