JVC GR-DV1800

84 EN
INDEX Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
1 Displays the selected Fade/Wipe effect.
(墌 pg. 32, 33)
2 Appears when in the Squeeze, Cinema or PS
Wide mode. (墌 pg. 28)
3 Rotates while the tape is running. (墌 pg. 16)
4 Displays the recording mode (SP or LP).
(墌 pg. 13)
5 Displays the tape remaining time. (墌 pg. 16)
6 •“REC” appears during recording.
•“PAUSE” appears during Record-Standby mode.
(墌 pg. 16)
7 Appears when the wind cut mode is engaged to
cut down on noise created by wind. (墌 pg. 28)
8 5S/Anim.: Displays the 5 second recording mode
or Animation recording mode.
(墌 pg. 28, 31)
9 Appears when the Insert Editing (w) or Insert
Editing Pause (6w) mode is engaged. (墌 pg. 72)
0 Displays the sound mode for approx. 5 seconds
after turning on the camcorder. (墌 pg. 27)
! Displays the Time Code. (墌 pg. 21, 29)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
SOUND
15
1
:
2
5
P
B
5
IT
LP
100
R
min
E
6
Anim.
C
w
1
2 4 56
90!87
3
UXGA F I NE
10/24
1
2 3
4 5 6
7
These indications also appear during DUAL mode.
1 Displays the file size of the stored image.
There are 3 modes available: UXGA, XGA and
VGA (in order of quality). (墌 pg. 14)
2 Appears and blinks during shooting. (墌 pg. 19)
3 Displays the quality of the stored image.
There are 2 modes available: FINE and STD
(standard) (in order of quality). (墌 pg. 14)
4 •Appears during shooting.
•Blinks when a memory card is not loaded.
(墌 pg. 19)
5 Displays the number of images that have already
been shot. (墌 pg. 19)
6 Displays the total number of shots that can be
stored, including those already taken. (墌 pg. 19)
7 Displays the UXGA mode:
(DOUBLE) or
(ENLARGE). (墌 pg. 14)
Downloaded from: https://www.usersmanualguide.com/