EN35
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
STEREO–
SOUND
1
SP
–
–
–
NRETUR
O.O
RE NEON SC LCD / TV
UAOT
IMETDATE /
T I ME CODE
–
–
– FFO
NRETUR
BEEP
MELODY
NO
TALLY
ID N MUBER
–
–
– 60
DEMO M.ODE – NO
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12
BIT
SYNC ROH
REC
END
For Playback Menu
The following procedure applies to all except
Synchro
Comp (
pg. 46).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select the desired
function menu, and press it. The selected function
menu appears.
4
Rotate the MENU/BRIGHT wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6
Rotate the MENU/BRIGHT wheel to select
“
1
RETURN” and press it twice to close the Menu
Screen.
Display
Power
Switch
MENU/BRIGHT Wheel
Lock Button
Recording Start/Stop Button
NOTE:
“REC MODE” can be set when the Power Switch is set to
“ ” or “ ” (
pg. 12, 32).
Menu Screen Explanations
pg. 36.
pg. 36.
pg. 46.
Allows you to set the recording
mode (SP or LP) depending on your
preference ( pg. 12).
It is recommended you use “REC
MODE” in the “ VIDEO” Menu
when using this camcorder as a
recorder during digital dubbing
( pg. 38).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
VIDEO
DISPLAY
SYSTEM
Each setting is linked with “ DISPLAY”
or “ SYSTEM”, which appears when
the Power Switch is set to “ ”
( pg. 33, 34).
The parameters are the same as in the
description on pg. 33, 34.
CONTINUED ON NEXT PAGE
To Next Page
