I
Digital zoom zone
I
10X (optical)
zoom zone
Zoom display
Approximate zoom ratio
Power Zoonl Level"
V V
0._ Power lamp
Operation Switch Power Switch
FEATURE: Zooming
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards "T".
Zoom Out
Slide the Power Zoom Lever towards "W".
mThe further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
• Focusing may bec_m_e unstable during Zooming. In
this case, set the zoom while in Record-Standb);
lock the focus by using the marlual focus
?_z" pg. 47), therl zoom irl or ()tit irl Record mode.
• In Full Auto) mode (when the Operation Switch is
set to ,,1_ ?, zoom magnification of up t_>40X is
possible. In Marnlal mode (when the Operation
Switch is set to "[_ ?, zooming is possible to a
maximum of 200X or can be switched to 10X
magrlification offered by optical zoom.
• Z_)om inagnification otover IOX is done thr_a_gh
Digital image processing, and is &eretbre called
Digital Z_*om.
• During Digital zoom, the quality of image may
Slll}_l',
• Digital zoom cannot be used while klnctions done
&rotgh Digital image pr_>cessing (Picture Wipe/
Dissolve function, _7 _lag: 42, Video E_h_*,
_7_ lag. 45, etc.) are activated.
• Macro shooting (as close as appr_>x. 5 cm (2? to the
subject) is possible when the Power Z<>om Lever is
set all the way t_> "W'. Al_o see "TELE MACRO" in
the System Menu orl page _,L
To Next Page
Loading...
