II1¢
MENU/SET Dial
Power Switch
Power lamp
rewind(_/--___i_a!
Button I \_ _ I_--/"-Fast-E°rward
_ 1_/Button
Infrared transmltter/recelver
CopyingimagesUsinginfrared
Communication[kTran-P]
Images stored in a MultiMediaCard can be coDied
between this camcorder and another piece of equipment
that supports IrDA (IrTran-P) infrared communication,
regardless of its manufacturer.
The following procedure is described using two
GR-DVM70 camcorders as an example. For use of other
rider! units, refer to their respective instructions.
LOAD MULTIMEDIACARDS
[For both receiving am| transmitting camcorders]
Insert MultiMedia( ards into both receiving and
transmitting camcorders.
SELECT OPERATION MODE
[For both re('eiving and transmitting ('am('orders]
Set the Prlwer Switch to " _" while pressing
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
ACCESSPLAYBACK MENU
[For both receiving and transmitting tatar'orders]
Press MENU/SET. The Playback Menu al_pears.
SELECT [:UNCTION
[For both receiving am| transmitting camcorders]
Rotate MENU/SET to move the highlight bar to
"lrTran-P" and press it. The selected parameter blinks.
SELECT IrTran-P MODE
[For transmitting camcorder]
Rotate MENU/SET until "TRANSMIT" appears and
press it. The normal playback screen appears.
SELECT IMAGE TO BE COPIED
[For transmitting camcorder] ,
Perform Index Playback (_T_ pg. 59), Auto Playback
(Y-T_ pg. 56) or press _ or I_ tr) select the desired
image.
To Next Page
Loading...
