RM-V7t 3U
(provided)
I _0! I
VCR CODE LIST
GE 0 0 PHILIPS 0 0
O0 O0
0 0 PANASONIC 0 0
O0 O0
HITACHI 0 0 0 0
O0 O0
Jvc A 0 0 0 0
B 0 0 RCA 0 0
c O0 O0
MAGNAVOX 0 0 0 0
O0 O0
O0 O0
0 0 SANYO 0 0
MITSUBISHI 0 0 0 0
0 0 SHARP 0 0
NEC 0 0 0 0
0 0 SONY 0 0
PHILIPS 0 0 0 0
O0 O0
O0 O0
O0
0 0 TOSHIBA 0 0
O0 O0
0 0 ZENITH 0 0
RandomAssemble[idifing [R.A.[dit]
Create edited videos easily using your camcorder as
the source ))layer. You can select up to 8 "cuts" for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the RM-V71 _U MBR
(Muhi-Brand Remote, _T_ pg. 80) is set to operate
with your brand of VCR (see VCR (ODE LIST), but
car/also be performed by operating the VCR
manually.
Before operation, mal<e sure the lithium battery is
installed in the remote control RM-V71 gU
('_ ,_pg. 80).
SETREMOTE/VcR cODE
SETREMOTE TO OPERATEVCR
Turn off tile power to the VCR and point the
remote towards the VCR's infrared sensor. Then,
referring to the V(R CODE LIST on the left,
press and hold MBR SET, and Press button (A)
and then (B).
• The code is automatically set once you release
MBR SET, and the V(R's power comes on.
OPERATE VCR
Make sure tile V(R's power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the
remote can control are PLAY, STOP, PAUSE, FF,
REW and VCR RE(- STBY (you do not need to
press SHIFT for this one).
You are now ready to try Random Assemble
Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
NOTES:
• It the VCR'_ power does not come on in st_p 1, try
another code trom tile VCR (:ODE LIST,
• Some brancg ot VCR ch_not come on automati-
cally, In this case, turn the power on manually and
try st_p 2,
• If the remot_ contrail is not able t_; o;ntrol the V¢R,
use the controls on the VCR,
• _Vherl the rdmote corltrol's battery furls out, the
VCR brand y_*u havd set will be erased.
In that case, rdplace the oM battery with a new one
to reset tile V(R brand.
To Next Page
Loading...
