JVC GR-DVX507 User Manual

36 EN
Master Page: Left
GR-DVX707EG_26-36.fm Page 36
You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
3 Open the LCD monitor fully, or pull out the
viewfinder fully.
4 Press the MENU
Wheel in. The Menu
Screen appears.
5 Rotate the MENU
Wheel to select
“FORMAT”, and press
it. The FORMAT
screen appears.
6 Rotate the MENU Wheel to select “EXECUTE”,
and press it. The memory card is initialised.
● When initialisation is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND FILES” appears.
● To cancel initialisation, rotate the MENU
Wheel to select “RETURN” and press it.
Initialising A Memory Card
OFF
P
L
A
Y
A
M
Power Switch
Lock Button
VIDEO/MEMORY Switch
MENU Wheel
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO . RE SE T
FORMAT
ORMA TF
EXECUTE
DATA?EX I ST I NG
ERASE ALL
RETURN
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted initialise it.
D.S.C. PLAYBACK (cont.)
GR-DVX707EG_26-36.fm Page 36 Tuesday, February 5, 2002 2:54 PM

JVC GR-DVX507 Specifications

General

Type	Digital Camcorder
Optical Zoom	10x
Image Sensor	CCD
LCD Screen	2.5 inch
Weight	1.1 lbs
Image Stabilizer	Electronic
White Balance	Auto, Manual
Microphone Operation Mode	Stereo
Microphone Type	Built-in
Recording Media	MiniDV
Image Stabilization	Electronic
Video Resolution	720 x 480
Focus Adjustment	Auto/Manual
Min Illumination	2 lux
Shooting Modes	Auto, Manual
Preset White Balance	Cloudy, Halogen
Special Effects	Sepia, Black & White
Digital Scene Transition	Wipe
Connector Type	USB, AV
Viewfinder Type	Color
Interface	IEEE 1394, USB
Image Sensor Size	1/4"