EN
20
MENU
DISPLAY
END
PROTECT
DELETE
DPOF
NO . RESE T
FORMAT
Protecting Files
The Protect mode helps prevent the accidental erasure
of files.
1 Perform steps 1 through 3 of “Normal Playback”
(墌 pg. 18).
2 Press MENU 4. The Menu Screen appears. Press +
or – 5 to select “PROTECT”, then press SELECT/SET
3.
3 Press + or – 5 to select the desired mode.
CURRENT : Protects the currently displayed file.
PROT.ALL : Protects all files stored on the memory
card.
4 Press SELECT/SET 3. The PROTECT Screen
appears.
• If you selected “CURRENT” in step 3, turn the
SHUTTLE SEARCH Ring # counterclockwise (
2
)
or clockwise (
3
) to select the desired file.
5 Press + or – 5 to select “EXECUTE” and press
SELECT/SET 3.
•To cancel protection, select “RETURN”.
NOTES:
● If the “ ” mark appears, the currently displayed file is
protected.
● When the memory is initialised or corrupted, even
protected files are deleted. If you do not want to lose
important files, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 and 2
above.
3 Press + or – 5 to select the desired mode.
CURRENT : Removes protection from the currently
displayed file.
CANC.ALL : Removes protection from all files stored
on the memory card.
4 Press SELECT/SET 3. The PROTECT Screen
appears.
• If you selected “CURRENT”, turn the SHUTTLE
SEARCH Ring # counterclockwise (
2
) or clockwise
(
3
) to select the desired file.
5 Press + or – 5 to select “EXECUTE” and press
SELECT/SET 3.
•To cancel selection, select “RETURN”.
ADVANCED FEATURES
Deleting Files
Previously stored files can be deleted either one at a
time or all at once.
1 Perform steps 1 through 3 of “Normal Playback”
(墌 pg. 18).
2 Press MENU 4. The Menu Screen appears. Press +
or – 5 to select “DELETE”, then press SELECT/SET
3.
3 Press + or – 5 to select the desired mode.
CURRENT : Deletes the currently displayed file.
ALL : Deletes all files stored on the memory
card.
4 Press SELECT/SET 3. The DELETE Screen
appears.
• If you selected “CURRENT” in step 3, turn the
SHUTTLE SEARCH Ring # counterclockwise (
2
)
or clockwise (
3
) to select the desired file.
5 Press + or – 5 to select “EXECUTE” and press
SELECT/SET 3.
• If the “ ” mark appears, the selected file is
protected and cannot be deleted (墌 “Protecting
Files”).
•To cancel deletion, select “RETURN”.
NOTES:
● Protected files (墌 “Protecting Files”) cannot be deleted
with the above operation. To delete them, remove
protection first.
● Once files are deleted, they cannot be restored. Check
files before deleting.
CAUTION
Do not remove the memory card or perform any other
operation (such as turning off the camcorder) during
deletion. Also, be sure to use the provided AC Adapter,
as the memory card may be corrupted if the battery
becomes exhausted during deletion. If the memory
card becomes corrupted, initialise it. (墌 pg. 24)
Display
Menu Screen:
IMAGE
To Next Page
Loading...
Need help?
General
