Master Page: Right
—14—
1 Connect the camcorder to the PC with an i.LINK cable. (墌 pg. 8)
2 Click [Start], go to [All Programs] – [PIXELA] – [MPEG Capture Utility], and then click
[MPEG Capture Utility].
● You can also double-click the [MPEG Capture Utility 1.0] icon on the desktop.
4 Click [Import], and then click [Browse].
The [Save As] dialog box appears.
Importing MPEG-format Video Stream to a PC
3 Make sure that the camcorder’s model name is
displayed.
● If the model name is not displayed, confirm the
connection (墌 pg. 8) or reinstall the driver (墌 pg. 16).
5 Specify the file name and location, and then click
[Save].
● Make sure to select a folder on the local hard disk.
● Approximately 150 MB (300 MB while importing) of the
hard disk space is required for a 1-minute video stream.
Select a destination with sufficient space for storage.
Import button
Model name
Browse button
CONTINUED ON NEXT PAGE
M3D8_InstaGuide01.fm Page 14 Tuesday, July 1, 2003 10:30 AM
To Next Page
Loading...
