24 EN
Master Page: Left
To Connect A Conventional TV or VCR
* If your VCR has a SCART connector, use the
provided cable adapter.
** Connect when your TV/VCR has S-VIDEO IN
and A/V input connectors. In this case, it is not
necessary to connect the yellow video cable.
*** Not required for watching still images only.
**** When connecting the cable, open the cover.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To Connect To A TV or VCR Equipped With The
Component Video Connectors
* Not required for watching still images only.
** When connecting the cable, open the cover.
Connections To A TV Or VCR
1234 5
TV
VCR
Connector
Cover****
A Not required for connection.
B Black to S-VIDEO IN**
C Yellow to VIDEO IN
D White to AUDIO L IN***
E Red to AUDIO R IN***
S/AV/Editing cable
(provided)
To S/AV
To TV or VCR
“Y/C”/“CVBS”
Video Out Select
Switch
Cable Adapter*
123
23
456
Wide-screen TV
VCR
Connector Cover**
A To component video connectors
B White to AUDIO L IN*
C Red to AUDIO R IN*
D Not required for connection.
E Not required for connection.
F Not required for connection.
S/AV/Editing cable
(provided)
To S/AV
To Y/PB/PR
Component video cable
(provided)
Push to connect or
disconnect
Audio extension cable
(provided)
VIDEO PLAYBACK (cont.)
GR-PD1PAL.book Page 24 Tuesday, June 17, 2003 7:31 PM
To Next Page
Loading...
