Master Page: Right
—3—
䡲 For copying still image files to a PC
The following requirements must be satisfied to connect the camcorder to a PC using the USB cable, and to
copy still image files from the memory card in the camcorder.
䡲 For using MPEG Capture Utility, MPEG Edit Studio
TM
Pro LE, ImageMixer DVD
The following requirements must be satisfied to connect the camcorder to a PC using an i.LINK cable, to
import MPEG-format video stream, and to edit video clips on a PC.
䡲 For creating a DVD Video
In addition to the system requirements above, a DVD recording drive which is compatible with
ImageMixer DVD is required. (DVD-RAM disc is not supported by ImageMixer DVD.)
For details on compatible DVD recording drives, visit the web site of Pixela Corporation.
http://www.imagemixer.com/
System Requirements
OS : Windows
®
XP Home Edition (pre-installed)
Windows
®
XP Professional (pre-installed)
Connector : USB connector
OS : Windows
®
XP Home Edition (pre-installed)
Windows
®
XP Professional (pre-installed)
CPU : Intel Pentium
®
4 (2 GHz or faster)
RAM : 256 MB (DDR SDRAM or DRD RAM) or more
384 MB or more if the main RAM is used for the video memory
(512 MB recommended)
Hard disk drive : UltraATA100 (7200 rpm or faster recommended)
Connector : IEEE1394 (i.LINK) connector
Display : 1024 x 768 or greater
Video memory : 32 MB or more
CONTINUED ON NEXT PAGE
M3D8_InstaGuide01.fm Page 3 Tuesday, July 1, 2003 10:30 AM
To Next Page
Loading...
