JVC GR-SXM57 - Playback Features; Counter M Emory Function

EN31
Set to “ ”.
TBC Button
PLAYBACK Features
COU N TER R/ M Button
Rewind ( 2 ) Button
Fast-Forward ( 3 ) Button
Play/ Pause ( 4 /6) Button
Stop (5) Button
Tra ck ing: Eliminates noise bars that appear on-screen
during playback. Factory-preset is Auto Tracking.
To activate Manual Tracking:
1) Press TRACKIN G for approx. 2 seconds. “MT” appears.
2) Rotate TRACKIN G so that the noise bars disappear.
● To return to Auto Tracking, press TRACKIN G for approx.
2 seconds or set the Power Switch to “OFF” and then
”
” again. “ AT” blinks. When Auto Tracking finishes,
the indication disappears.
● When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “ AT” is
displayed.
● Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
TBC (Time Ba se Corrector): Removes jitter from
fluctuating video signals to deliver a stable picture even
with old tapes. Factory-preset: TBC is engaged.
To activate/release the TBC mode, press TBC during
playback for more than 1 second. When the TBC mode is
activated, “ TBC” is displayed.
Counter M emory Function: Makes it easier to
locate a specific tape segment.
1) Press COU N TER R/ M and hold for more than 1 second.
The counter resets to “0:00:00”.
2) Press COU N TER R/ M for less than 1 second.
“M” appears.
3) After recording or playback, press 5, then 2 . The tape
automatically stops at or close to 0:00:00.
4) Press 4 /6 to start playback.
● The counter memory functions in the Fast-Forward and
Rewind modes.
● To disable the Counter Memory Function, press
COU N TER R/ M for less than 1 second so that “M”
disappears.
Pla yba ck Special Effects (CLASSIC FILM ,
M O N OTON E, SEPIA, STROBE a nd VIDEO
ECHO , 墌 pg. 2 1 ) (GR-SXM 6 0 7 / SXM 5 7 /
SX2 0 2 only): Allows you to add creative effects to the
playback image.
1) Activate the TBC mode and Auto Tracking.
2) Press DIGIFECT repeatedly until the desired mode’s
name and indication appear. They are displayed for
approx. 2 seconds, then the name disappears so that
only the indication remains. The mode is activated.
3) To cancel the effect, select “ OFF” in step 2.
● Playback Special Effects do not work during shuttle
search.
● The selected effect mode cannot be changed during still
playback.
TRACKIN G
W heel
For other notes, 墌 pg. 45
Downloaded from: https://www.usersmanualguide.com/