4 EN
• AC Adapter
AP-V10EG
• Remote Control Unit RM-V715U
(GR-SXM607/ SXM 57/ SX202
only)
• Shoulder Strap
• Battery Pack
BN -V11U (GR-FXM 37/ FX12)
BN -V20U (GR-SXM 607/ SXM57/
SXM47/ SX202/ SX22)
• Cable Adapter
(with an -IN connector)
(GR-SXM607/ SXM 57/ SXM47/
SX202/ SX22 only)
• A/ V (Audio/ Video) Cable• AAA (R03) Battery x 2
(for Remote Control U nit,
GR-SXM 607/ SXM 57/ SX202 only)
• S-Video Cable
(GR-SXM607/ SXM 57/
SXM47/ SX202/ SX22
only)
• Core Filter x 3
(for provided A/ V Cable
and AC Adapter,
GR-FXM37/ FX12 only)
• Core Filter x 4
(for provided A/ V Cable,
S-Video Cable and AC Adapter,
GR-SXM 607/ SXM 57/ SXM 47/
SX202/ SX22 only)
• Cable Adapter
(without an -IN connector)
(GR-FXM 37/ FX12 only)
• Lens Cap
• Power Cord
AUTO M ATIC DEM ON STRATIO N
Automatic D emonstration takes place when ”D EM O M O D E” is set to ”O N ”
(factory-preset).
Available when the Power Switch is set to ” ” or ” ”.
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
“DEMO MODE” remains ” ON” even if the camcorder power is turned
off.
To cancel Automatic Demonstration, set the Power Switch to “ ” and
press M EN U while the demo is in progress. This takes you directly to the
demo mode’s Setting Menu (so you will not have to go through the main
Menu Screen). Rotate M EN U to select “OFF” and press it.
N OTE:
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
Setting M enu
PRO VIDED ACCESSORIES
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
