]
Slot
Battery holder
©-,©
Clock(Lithium)ButteryInsertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
Switch off time unit's power and remove time power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).
REMOVE BATTERYHOLDER
Pull out the battery holder.
INSERT BATTERY[N HOLDER
Insert time battery in time holder, and be sure to have
the "+" mark visible.
RE4NSERT HOLDER
Slide the holder back into the slot until you hear a
click.
NOTE:
See ".SAFETY PRECAUTIONS" (_ pg. 2) for information
on safe handling of lithium batteries.
To Next Page
Loading...
