] 2EN¸ .... o
oo °
• MENU Button
• SP/EP Recording Mode Button
Select Dial
Viewfiuder
Display
0
0
RecordingModeSetting
Set depending on your preference.
SET RECORDING MODE
First set the Power Switch to "AUTO" or "PRO.".
Press SP/EP for more than 1 second. "SP" (Standard
Play) provides higher picture and sound quality and is
beiler for dubbing, while "EP" (Extended Play) is
more economical, providing three times the record-
ins time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Power Switch
TapeLengthSetting
Set the tape length according to the length of the tape
used.
ACCESS MENU SCREEN
Firstsetthe PowerSwitchto "PRO.". PressMENU.
indicator
mode
SELECT FUNCTION
Rotate the Select Dial to move the highlight bar to
"TAPE LENGTH", then press it. The TAPE LENGTH
Setting Menu appears.
SETTAPE LENGTH
Rotate the Select Dial to move the highlight bar to the
correct setting. T20=20 minutes of recording time,
T30=30 minutes, and T40=40 minutes (in SP).
Menu Screen e If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to "EXIT".
TAPE LENGTH
Setting Menu
CLOSE MENU SCREEN
Press the Select Dial. The Menu S(-reen reappears with
the highlight bar on "RETURN". Press the Select Dial
gain to close the Menu Screen.
NOTE:
The tape remaining time (_ pg. 79) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
To Next Page
Loading...
