JVC GR-SXM915 - Date;Timesettings

Date/TimeSettings
oo °
• MENU Button
I
Q
Select DIM
Power lamp
Power Switch
Menu Screen
DATE/TIME Menu
indication
with AM or PM
Display
O
]
|
ACCESSMENU SCREEN
Set the Power Switch to "PRO.", then press MENU.
. Time power lamp comes on.
SELECT FUNCTION
Rotate the Select Dial to move time highlight bar to
"DATE/TIME", then press it. Time DATE/TIME Menu
appears.
If you decide you want to returntime date and time
to the previous settings, rotate the Select Dial to
move time highlight bar to "EXIT" and press it, then
go to step 6.
If you want to set only the time without changing
the date, go to step 4.
SET DATE
Rotate time Select Dial to move time highlight bar to the
item you want to set and then press it. When the
setting begins blinking, rotate the Select Dial until the
correct setting appears and then press it. Time seiling
stops blinking.
Repeat this procedure until you're satisfied with the
Date settings ("YEAR", "MONTH" and "DAY").
SET TIME
Rotate time Select Dial to move the highlight bar to
"TIME" and then press it. When the hour setting
begins blinking, rotate the Select Dial until the correct
setting appears and then press it. When time hour
setting stops blinking and time minute setting begins
blinking, rotate the Select Dial until the correct setting
appears and then press it. Time minute setting stops
blinking.
STARTCLOCK OPERATION
When none of these settings (YEAR, MONTH, DAY,
TIME) blinks, rotate the Select Dial to move the
highlight bar to "EXIT", and press it. Time Menu
Screen reappears with the highlight bar on
"RETURN".
CLOSE MENU SCREEN
Press the Select Dial.
NOTE:
To display the date and time in the camcorderts display
and on a connected TV, see "Date/Time Insert"
(_Y pg. 3d).