JVC GR-SXM915 - Page 32

MENU Button
Display
(ex. Menu Screen available
using the MENU Button)
Menu Screen 1
0
0
0
Menu Screen 2
%
So|ring Menu
(ex. TITLE LANG.)
%
%
Normal Screen
NOTE:
No menu functions except "FOCUS" and
"EXPOSURE" are awdlable while in the Record
mode.
Using MenuForDetailedAdjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
SELECTOPERATION MODE
l]un the Power Switch to "PRO.".
ACCESSMENU SCREEN
Menu access depends on the function you select.
If you select the functions from the "Menu Screen
Available Using The Select Dial" described on
pg. 33...
.... press the Select Dial. The Menu Screen appears.
If you select the functions from the "Menu Screen
Available Using The MENU Button" described on
pg. 33 and 34.,,
.... press MENU. The Menu Screen appears.
SELECTFUNCTION
Rotate the Select Dial to place the highlight bar on
the desired function.
oTo go from Menu Screen 1 to Menu Screen 2, rotate the
Select Dial to "NEXT" and press it. To go back to Menu
Screen 1 from Menu Screen 2, rotate the Select Dial to
"BACK", and press it
• If the setting you want cannot be found in the Menu
Screen, place the highlight bar on "RETURN", then go
to step 6.
MAKE SETTING
Press the Select Dial. The setting procedure depends
on the function you so]oct.
If you select "FOCUS", "EXPOSURE", "TITLE';
"DATE/TIME DISP." or "DATE/TIME"...
.... see respective pages (FOCUS: _"< pg. 36, 37,
EXPOSURE: _"< pg. 35, TITLE: _"< pg. 31,
DATE/TIME DISR: _ 7 pg. 30, DATE/TIME: _"< pg. 11).
If you select "WIDE'; "D.ZOOM'; "TELE MACRO"
or "DEMO MODE"..,
.... the selected function's parameter starts blinking.
Rotate the Select Dial until the desired parameter
appears. Go to step 5.
If you select "JLIP ID NO."...
.... press the Select Dial so that the number blinl<s, then
rotate it until the desired number appears, and press
it. Then rotate the Select Dial to move the highlight
bar to "EXIT".
If you select any other functions,,.
.... rotate the Select Dial to move the highlight bar to the
desired setting.
• If you decide you want to return to the previous
setting, rotate the Select Dial to move the highlight
bar to "EXIT".
END SETTING
Press the Select Dial. The Menu Screen reappears
with the highlight bar on "RETURN".
CLOSE MENU SCREEN
Press the Select Dial. The normal screen reappears.