SUPPLY POWER
Hook on.
PPush in.
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder (_)) and push the
battery pack in until it locks in place (®).
(Charging procedure, _zT pg. 8)
To remove the battery pack
Slide BATTERYRELEASEand puII out timebattery
pack.
r _- -_
PLAYBACK
(_-/lll) Button
STOP (lI) Button
Set to "PLAY"
[] Set timePower Switch to "PLAY".
l_l PressREW (_).
Timetape wiI[ automatically stop at the
beginning of timetape.
[] Press PLAY/PAUSE (1_/!1).
Playback starts and the playback picture
appears.
To stop playback, press STOP (I).
(For more details, _ pg. 42.)
The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
The LCD monitor turns on/off when it is
opened/dosed at approx. 60 degrees.
Orsim y play back the tape on a VHS VCR
usingthe Cassette Adapter (VH S Playpak)_I
_ pg. 45 I
J
INSERTING A VIDEO
CASSETTE
PUSH Button EJECTSwitch
[] Open time LCD monitor to an angle of over 60
degrees.
[] Slide EJECT to open the cassette holder.
[] Insert a vide() cassette.
[] Press PUSH to dose the cassette holder.
(For more details, _:Y" pg. 13)
SHOOTING
S COVER
en/Ciose Ring
to "AUTO"
[ or "PRO,"
Recording Start/Stop Button
[] ]]mmtimeLENSCOVER Open/Close Ring to
open the lens cover.
[] Set the Power Switch to "AUTO" or "PRO.".
Timepower lamp will light and an image
will appeal.
[] PresstimeRecording Start/Stop Button.
Recording starts.
To stop recording temporarily, momentarily
press timeRecording Start/Stop Button once
again.
(For more details, _7 pgs. 18 21)
The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.