1-10 (No.YF227<Rev.001>)
NOTE13:
Be careful with the wiring.
NOTE14a:
During the procedure, be careful in handling the parts.
NOTE14b:
Refer to 3.2.3
Assembly/Disambly of [14] OP BLOCK ASSY/
CCD BOARD ASSY
.
NOTE15a:
During the procedure, turn the MONITOR ASSY 90°, so that
it does not interfere with the procedure.
NOTE15b:
During the procedure, be careful not to damage the parts.
NOTE16a:
When removing, remove the screw No.32 first to release the
FPC, and then pull out the FPC from the connector.
NOTE16b:
When attaching, be careful with the wiring.
NOTE17:
When attaching, be careful with the wiring.
NOTE18:
Refer to 3.2.4 Disassembly of [18] MONITOR ASSY.
z Destination of connectors
CN.
No.
PIN
No.
CONNECTOR
CN5 MAIN CN102 HDD - 40
CN7a MAIN CN104 ZOOM UNIT - 12
CN7b MAIN CN103 REAR
CN601 32
CN10 MAIN CN101 OPE CN401 30
CN11 MAIN CN107 MIC - 4
CN13a MAIN CN105 CCD CN5001 22
CN13b MAIN CN106 OP BLOCK - 25
CN16a OPE CN403 SPEAKER - 2
CN16b OPE CN402 MONITOR CN7601 22/23
To Next Page
Loading...
