What to do if JVC GZ-MG345 Camcorder doesn't turn on or battery life is short?
If your JVC Camcorder does not turn on, or the battery operation time is extremely short even after being fully charged: * Ensure you are using the camera within appropriate operating temperatures. * The battery may be worn out and needs replacement. Consider purchasing a new battery.
How to troubleshoot power issues on a JVC GZ-MG345 Camcorder?
If your JVC Camcorder is not getting power: * Connect the AC adapter securely. * Detach the battery pack and reattach it firmly. * Replace the dead battery with a fully charged one.
Why isn't the charging lamp lighting up on my JVC GZ-MG345 Camcorder?
If the access/charge lamp on your JVC Camcorder does not light during charging: * Charging may be stopped in extremely high/low temperatures to protect the battery. Charge in a temperature between 10°C to 35°C. * The lamp does not light when the battery is already fully charged. Check the remaining battery power.
Why is the 7REC indicator flashing on my JVC GZ-MG345 Camcorder during video recording?
If the JVC Camcorder's temperature is increasing during video recording, the 7REC indicator may flash. If the camcorder continues to heat up, it may stop recording to protect the recording medium. Turn off the power and wait until the camcorder cools down.
Why is the Findicator flashing on my JVC Camcorder during video playback?
If the JVC Camcorder's temperature is increasing during video playback, the Findicator may flash. If the camcorder continues to heat up, playback may be stopped to protect the recording medium. In this case, turn off the power, and then wait until the camcorder cools down.
What to do if my JVC GZ-MG345 is not recording?
If your JVC Camcorder is not recording, it might be due to these reasons: * The recording medium is full. Delete unnecessary files or replace the microSD card. * The recording medium is not selected properly. Ensure you select the correct recording medium.
How to fix autofocus on JVC GZ-MG345?
If your JVC Camcorder does not focus automatically: * Set [FOCUS] to [AUTO]. * Clean the lens and check the focus again.
What to do if my JVC Camcorder won't playback videos?
If your JVC Camcorder is not playing back: * Select the correct recording medium. * When watching images on a TV, set the TV’s input mode or channel that is appropriate for video playback.
Why is my JVC Camcorder so slow after turning it on?
If the data process is too slow on your JVC Camcorder after switching it on or changing the mode, it could be due to a large number of still images (approximately 1,000 or more) stored in the recording medium. Copy the stored files to other devices and then delete them from the recording medium.
Why doesn't digital zoom work on my JVC Camcorder?
If digital zoom is not working on your JVC Camcorder: * Change the settings in [ZOOM]. * Digital zoom is not available in still image recording mode.
General| Recording Format | MPEG-2 |
|---|---|
| Sensor Type | CCD |
| Digital Zoom | 800x |
| LCD Screen Size | 2.7 inches |
| Storage Type | Hard Drive |
| Camcorder Media Type | HDD |
| Optical Sensor Size | 1/6 inch |
| Focus Adjustment | Automatic, Manual |
| Image Stabilizer | Electronic |
| Microphone Operation Mode | Stereo |
| Hard Drive Capacity | 30 GB |
| Sensor | CCD |
| Still Image Format | JPEG |
| Interface | USB 2.0 |
| Shooting Programs | Auto, Sports, Portrait, Spotlight |
| White Balance | Auto |
| Connector Type | USB |
| Effective Pixels | 680, 000 pixels |
| Lens | JVC lens |
| LCD Screen Pixels | 123, 000 |
| Battery | BN-VF808 |
Steps for initial camera setup and readiness, including battery and monitor.
Instructions for capturing video footage using the camcorder.
How to review recorded video and still images on the camcorder.
Essential safety advice for preventing hazards like fire and electric shock.
Guidelines for battery handling and environmental considerations.
Warnings to prevent physical damage to the camera and user.
Precautions for electrical connections and handling AC adapters.
Information on product trademarks and intended consumer use.
Guide to navigating menus using the touch sensor.
How to interact with on-screen buttons via the touch sensor.
Instructions for connecting and using the Everio Dock accessory.
Guide to attaching the core filter for interference reduction.
Icons and indicators shown during video and still image recording.
Specific indicators for video recording mode.
Specific indicators for still image recording mode.
Icons and indicators displayed during video playback.
Icons and indicators displayed during still image playback.
How to change the information displayed on the LCD.
Instructions for charging the camera's battery.
Guide to setting the camera's date and time.
Instructions for attaching the shoulder strap.
How to check the battery level and recordable time.
Guide to setting up and using the remote control.
Step-by-step guide to begin recording video.
Settings for stopping, viewing, aspect ratio, and picture quality.
Step-by-step guide to begin capturing still images.
Settings for viewing, picture quality, continuous shooting, and image size.
Steps to select video or still image mode and begin playback.
Controls for navigating and managing playback of video and images.
Preparation steps for connecting the camera to a TV.
How to display camera output and adjust aspect ratio on TV.
Procedures for deleting or protecting individual files.
Procedures for deleting or protecting all files at once.
Overview of copying methods and compatible devices.
Detailed steps for copying files to a DVD burner.
Hardware and software specifications for Windows PC backup.
Guide to installing the provided backup software on Windows.
Steps for connecting the camera to a PC via USB.
Using the software to back up files from the camera to the PC.
Method for backing up files manually via drag-and-drop.
Tips for utilizing the provided PC software features.
Overview of camera file and folder organization.
Hardware and software specifications for Macintosh backup.
Guide for backing up files from the camera to a Macintosh.
Contact information for JVC product support.
Contact information for CyberLink software support.
Solutions for common operational problems and errors.
Troubleshooting steps for power supply and recording failures.
Solutions for playback errors and data processing problems.
Instructions for cleaning the camera exterior, LCD, and lens.
Meaning of battery indicator symbols and behavior.
Explanations of various warning and status messages.
Technical details of the camera's hardware and features.
Technical details for video and audio recording formats.
Details on image formats, sizes, and connectivity ports.
Technical details of the remote control's dimensions, power, and operating range.
Approximate recording times for video and image storage capacity.
Warnings and precautions for handling battery packs.
Precautions to prevent data corruption on recording media.
Guidelines for preventing damage to the LCD monitor.
Safety warnings for the camera's main unit regarding use and environment.
To Next Page
